Dual Wall Flame Adhesive Lined Clear Heat Shrink Tubing
DWRS-125G is a cross-linked polyolefin tube that is extruded with an inner layer of adhesive. The inner layer of adhesive, with superior sealing capability, is also a buffer against mechanical strain. Dual wall heat shrink tubing is designed to provide superior sealing against water, corrosive gas, and chemicals.
Structure
Technical Performance
Property | Typical data | Test method/condition |
Tensile strength | ≥12MPa | ASTM D 2671 |
Elongation at break | ≥400% | ASTM D 2671 |
Tensile strength after heat aging | ≥11MPa | 158℃ ×168h |
Elongation after heat aging | ≥350% | 158℃ ×168h |
Longitudinal change | 0~+10% | ASTM D 2671 |
Flammability | Self extinguishing in 30 sec. | AMS-DTL-23053/4 |
Dielectric strength | ≥15kV/mm | IEC 60243 |
Volume resistivity | ≥1014Ω.cm | IEC 60093 |
Technical Performance of Adhesive
Technical Performance of Adhesive
Property | Typical data | Test method/condition |
Softening point | 95±5°C | ASTM E 28 |
Water absorption | <0.5% | ASTM D 570 |
Peel strength(PE) | ≥120N/25mm | ASTM D 1000 |
Peel strength(AI) | ≥80N/25mm | ASTM D 1000 |
Technical Performance of Adhesive
Dimension
Size(mm) | As supplied D(mm) | After full recovery (mm) | Standard Package |
Inner diameter d | Wall thickness w1 | Thickness of adhesive layer w2 | (M/Roll or M/PCS) |
Φ3.2 | ≥3.0 | ≤1.00 | ≥1.00 | 0.50 | 200 |
Φ4.8 | ≥4.8 | ≤1.50 | ≥1.00 | 0.50 | 100 |
Φ6.4 | ≥6.0 | ≤2.00 | ≥1.00 | 0.50 | 100 |
Φ7.9 | ≥7.9 | ≤2.70 | ≥1.30 | 0.50 | 100 |
Φ9.5 | ≥9.0 | ≤3.00 | ≥1.40 | 0.60 | 50 |
Φ12.7 | ≥12.0 | ≤4.00 | ≥1.60 | 0.80 | 25 |
Φ15.0 | ≥15.0 | ≤5.00 | ≥1.80 | 0.80 | 25 |
Φ19.1 | ≥19.0 | ≤6.00 | ≥2.10 | 0.80 | 25 |
Φ25.4 | ≥25.4 | ≤8.00 | ≥2.40 | 1.00 | 25 |
Φ30.0 | ≥30.0 | ≤10.0 | ≥2.40 | 1.00 | 25 |
Φ39.0 | ≥39.0 | ≤13.0 | ≥2.40 | 1.00 | 1.2 |
Φ50.0 | ≥50.0 | ≤19.0 | ≥2.40 | 1.00 | 1.2 |
Size(mm) | As supplied D(mm) | After full recovery (mm) | Standard Package |
Inner diameter d | Wall thickness w1 | Thickness of adhesive layer w2 | (M/Roll or M/PCS) |
Φ4.0 | ≥4.0 | ≤1.00 | ≥1.00 | 0.50 | 200 |
Φ6.0 | ≥6.0 | ≤1.50 | ≥1.00 | 0.50 | 100 |
Φ8.0 | ≥8.0 | ≤2.00 | ≥1.00 | 0.50 | 50 |
Φ12.0 | ≥12.0 | ≤3.00 | ≥1.40 | 0.60 | 25 |
Φ16.0 | ≥16.0 | ≤4.00 | ≥1.60 | 0.80 | 25 |
Φ18.0 | ≥18.0 | ≤4.50 | ≥1.60 | 0.80 | 25 |
Φ20.0 | ≥19.0 | ≤5.00 | ≥1.80 | 0.80 | 25 |
Φ24.0 | ≥24.0 | ≤6.00 | ≥2.10 | 0.80 | 25 |
Φ32.0 | ≥32.0 | ≤8.00 | ≥2.40 | 1.00 | 1.22 |
Φ40.0 | ≥40.0 | ≤10.0 | ≥2.40 | 1.00 | 1.22 |
Φ52.0 | ≥52.0 | ≤13.0 | ≥2.40 | 1.00 | 1.22 |
Technical Performance of Adhesive
De ce să ne alegeți:
1. Puteți obține materialul perfect conform cerințelor dvs. la cel mai mic preț posibil.
2. Oferim, de asemenea, Reworks, FOB, CFR, CIF și prețuri de livrare ușă în ușă. Vă sugerăm să faceți o afacere pentru expediere, care va fi destul de economică.
3. Materialele pe care le oferim sunt complet verificabile, chiar de la certificatul de testare a materiei prime până la declarația dimensională finală. (Rapoartele se vor afișa la cerere)
4. Garanția de a da un răspuns în 24 de ore (de obicei în aceeași oră)
5. Puteți obține alternative de stoc, livrări de moara cu minimizarea timpului de fabricație.
6. Suntem pe deplin dedicați clienților noștri. Dacă nu va fi posibil să vă îndepliniți cerințele după examinarea tuturor opțiunilor, nu vă vom induce în eroare făcând promisiuni false care vor crea relații bune cu clienții.
Turul fabricii
CONTACTAŢI-NE
Persoana de contact:doamna Jessica Wu
E-mail :sales@heatshrinkmarket.com
WhatsApp/Wechat : 0086 -15850032094
ABORDARE:No.88 Huayuan Road, Aoxing Industrial Park, Mudu Town, Wuzhong District, Suzhou, China
