CMSIA is military grade cable and wire identification sleeves, which are made of cross-linked environmentally friendly polyolefin bombarded by a high-power electron beam with electronic accelerators to meet requirements of high-end markets where highly reliable cable& wire identification is required. It accords to Classes 1 and 3 of AMS-DTL-23053/5 half-hard high molecular materials. For this prod

CMSID is a halogen-free, low-smoke, highly flame retardant cable and wire identification sleeve, which is designed to meet the requirements of EMU for high-speed rails, subways, and motor train units. It is made of the polyolefin by means of bombarding and cross-lining of the high energy electron beam. Flammability, smoke density, toxicity index, electrical, physical and chemical performances conf

CMSIU halogen-free heat shrink cable marker identification sleeves are made of cross-linked flame retardant polyolefin with outstanding properties. Meet the requirements of high-performance identification of wire and cable, tools, hose, and equipment. Sleeves can also be used as electrical insulation.Marks are permanent after printing.

TRS-DR150 is a kind of heat shrink tubing made of flexible elastomeric polyester which is designed for harsh operating conditions. It is resistant to a wide range of solvents and chemicals including aviation fuel, diesel fuel, lubricating oils, and hydraulic fluid.

TRS-VT200 Viton fluoroelastomer heat shrink tubing is made of special designed fluoro rubber which was cross-linked by radiation with scientific formula. It is highly abrasion and cut-through resistant and can withstand a wide variety of fuels, lubricants, acids, and highly corrosive fluids at temperatures up to 200°C.

TRS-EPDM150(2X) is a kind of heat shrink tubing made through a complicated formulation of EPDM rubber and special resins. It has much better physical and mechanical performance and higher dielectric strength, abrasion, and wear resistance properties than normal EPDM tubing. suitable for jacketing and protection of cables, pipes, and connectors. Mainly used for protecting solder joints, wires, cabl

TZRS-SIL200(1.7X) silicone rubber heat shrink tubing is made of silicone rubber and polymer elastomer modified by radiation and can be used at high temperatures for a long time, with acid and alkali resistance, solvent resistance, and resistance to external mechanical damage. It can be used for military vehicles, high-speed trains, ship equipment, or electrical appliances industries such as cable

TRS-PVDF175(2X) Kynar Heat shrink Tubing is a cross-linked Kynar tubing offering a high degree of mechanical strength and high-temperature resistance. Fabricated from polyvinylidene fluoride, the tubing has outstanding abrasion resistance and cut-through properties in combination with high dielectric strength. It is inherently flame retardant, semi-rigid, and highly resistant to most industrial fu

TRS-PTFE260 is a highly flame-retardant heat shrink tubing made of modified PTFE material which provides insulation and mechanical protection in severe chemical and thermal environments. It is a thin wall with, a high shrink ratio, flexible and transparent, mainly used for electrical insulation, protection of electronic components, covering of hydraulic hoses and couplings, and prevention against

TRS-HW(2X) Non-slip textured decorative heat shrink Tubing is made of irradiation cross-linked polyolefin material, especially used for the non-slip, non-skid decorative purposes for handles and grips on high-grade fishing tackle, sports equipment, fitness equipment, daily supplies, various tools, kitchenware, etc.

SKBT-HV High Voltage Heat shrink busbar insulation tubing is a kind of continuous tubing made of radiation cross-linked polyolefin which carries excellent insulating performance. Typical applications include insulation of electrical bus bars rated up to 35KV rectangular, square, and round bus bars for cabinet, substation switchgear, etc.

SKBT-MV Medium Voltage Heat shrink busbar insulation tubing is a kind of continuous tubing made of radiation cross-linked polyolefin which carries excellent insulating performance. Typical applications include insulation of electrical bus bars rated up to 10KV rectangular, square, and round bus bars for cabinet and substation switchgear, etc.

SKBT-LV Low Voltage Heat shrink busbar insulation tubing is a kind of continuous tubing made of radiation cross-linked polyolefin that carries excellent insulating performance. Typical applications include insulation of electrical bus bars rated up to 1KV rectangular, square, and round bus bars for cabinet and switchgear.

HWNJ-125G(3.5X) heavy wall flame retardant heat shrink tubing is made of flame retardant polyolefin without a layer of hot melt adhesive inside. It carries excellent insulation and sealing, corrosion resistance performance, with which it was found in wide applications like insulations and protections for high voltage cable middle connections and terminations, bus bars, etc.

HWDJ-125G(3.5X) heavy wall adhesive-lined heat shrink tubing is made of flame retardant polyolefin extruded with a layer of hot melt adhesive inside. It carries excellent insulation and sealing, corrosion resistance performance, with which it was found in wide applications like insulations and protections for high voltage cable middle connections and terminations, bus bars and etc.

MWNJ-125G(3.5X) medium wall heat shrink tubing is made of flame-retardant polyolefin materials by ionizing radiation technology with electronic accelerators. It carries excellent insulation, flame retardant, and flexibility.

MWDJ-125G(3.5X) Medium Wall adhesive-lined heat shrink tubing is made of flame retardant polyolefin extruded with a layer of hot melt adhesive inside. The product is specially designed to provide insulation protection for medium and low voltage cable middle connections, terminations, and various bus bars and other corrosion-resistant, moisture-proof, and sealing purposes.

DWRS-125G(3X)(4X) is a cross-linked polyolefin tube that is extruded with an inner layer of adhesive. The inner layer of adhesive, with superior sealing capability, is also a buffer against mechanical strain. Dual wall heat shrink tubing is designed to provide superior sealing against water, corrosive gas, and chemicals.

TWRS-135G military standard flame retardant heat shrink tubing is made of radiation cross-linked polyolefin which has excellent physicochemical and electrical properties. Typical applications include insulation of electrical connections, wire splices or terminals, rust, and corrosion resistance for the soldered connections or joints, and mechanical and wiring harness protection in electronics, com

TWRS-125CB halogen-free ultra-thin flame retardant heat-shrink tubing, made of radiation cross-linked polyolefin, carries excellent physicochemical and electrical properties. Typical applications include insulation of electrical connections, rust, and corrosion resistance for soldered connections or joints, and mechanical and wiring harness protection. This product is widely used in automotive, ag