Dual Wall Flame Adhesive Lined Clear Heat Shrink Tubing
DWRS-125G is a cross-linked polyolefin tube that is extruded with an inner layer of adhesive. The inner layer of adhesive, with superior sealing capability, is also a buffer against mechanical strain. Dual wall heat shrink tubing is designed to provide superior sealing against water, corrosive gas, and chemicals.
Structure
Technical Performance
Property | Typical data | Test method/condition |
Tensile strength | ≥12MPa | ASTM D 2671 |
Elongation at break | ≥400% | ASTM D 2671 |
Tensile strength after heat aging | ≥11MPa | 158℃ ×168h |
Elongation after heat aging | ≥350% | 158℃ ×168h |
Longitudinal change | 0~+10% | ASTM D 2671 |
Flammability | Self extinguishing in 30 sec. | AMS-DTL-23053/4 |
Dielectric strength | ≥15kV/mm | IEC 60243 |
Volume resistivity | ≥1014Ω.cm | IEC 60093 |
Technical Performance of Adhesive
Technical Performance of Adhesive
Property | Typical data | Test method/condition |
Softening point | 95±5°C | ASTM E 28 |
Water absorption | <0.5% | ASTM D 570 |
Peel strength(PE) | ≥120N/25mm | ASTM D 1000 |
Peel strength(AI) | ≥80N/25mm | ASTM D 1000 |
Technical Performance of Adhesive
Dimension
Size(mm) | As supplied D(mm) | After full recovery (mm) | Standard Package |
Inner diameter d | Wall thickness w1 | Thickness of adhesive layer w2 | (M/Roll or M/PCS) |
Φ3.2 | ≥3.0 | ≤1.00 | ≥1.00 | 0.50 | 200 |
Φ4.8 | ≥4.8 | ≤1.50 | ≥1.00 | 0.50 | 100 |
Φ6.4 | ≥6.0 | ≤2.00 | ≥1.00 | 0.50 | 100 |
Φ7.9 | ≥7.9 | ≤2.70 | ≥1.30 | 0.50 | 100 |
Φ9.5 | ≥9.0 | ≤3.00 | ≥1.40 | 0.60 | 50 |
Φ12.7 | ≥12.0 | ≤4.00 | ≥1.60 | 0.80 | 25 |
Φ15.0 | ≥15.0 | ≤5.00 | ≥1.80 | 0.80 | 25 |
Φ19.1 | ≥19.0 | ≤6.00 | ≥2.10 | 0.80 | 25 |
Φ25.4 | ≥25.4 | ≤8.00 | ≥2.40 | 1.00 | 25 |
Φ30.0 | ≥30.0 | ≤10.0 | ≥2.40 | 1.00 | 25 |
Φ39.0 | ≥39.0 | ≤13.0 | ≥2.40 | 1.00 | 1.2 |
Φ50.0 | ≥50.0 | ≤19.0 | ≥2.40 | 1.00 | 1.2 |
Size(mm) | As supplied D(mm) | After full recovery (mm) | Standard Package |
Inner diameter d | Wall thickness w1 | Thickness of adhesive layer w2 | (M/Roll or M/PCS) |
Φ4.0 | ≥4.0 | ≤1.00 | ≥1.00 | 0.50 | 200 |
Φ6.0 | ≥6.0 | ≤1.50 | ≥1.00 | 0.50 | 100 |
Φ8.0 | ≥8.0 | ≤2.00 | ≥1.00 | 0.50 | 50 |
Φ12.0 | ≥12.0 | ≤3.00 | ≥1.40 | 0.60 | 25 |
Φ16.0 | ≥16.0 | ≤4.00 | ≥1.60 | 0.80 | 25 |
Φ18.0 | ≥18.0 | ≤4.50 | ≥1.60 | 0.80 | 25 |
Φ20.0 | ≥19.0 | ≤5.00 | ≥1.80 | 0.80 | 25 |
Φ24.0 | ≥24.0 | ≤6.00 | ≥2.10 | 0.80 | 25 |
Φ32.0 | ≥32.0 | ≤8.00 | ≥2.40 | 1.00 | 1.22 |
Φ40.0 | ≥40.0 | ≤10.0 | ≥2.40 | 1.00 | 1.22 |
Φ52.0 | ≥52.0 | ≤13.0 | ≥2.40 | 1.00 | 1.22 |
Technical Performance of Adhesive
Kial Elekti Nin:
1. Vi povas akiri la perfektan materialon laŭ via postulo je la plej malgranda ebla prezo.
2. Ni ankaŭ proponas Reworks, FOB, CFR, CIF, kaj pordo al pordo livero prezoj. Ni sugestas vin fari traktadon por sendado, kiu estos sufiĉe ekonomia.
3. La materialoj, kiujn ni provizas, estas tute kontroleblaj, ĝuste de krudmateriala testatestilo ĝis la fina dimensia deklaro. (Raportoj montros laŭ postulo)
4. Garantio doni respondon ene de 24 horoj (kutime en la sama horo)
5. Vi povas akiri stokajn alternativojn, muelejajn liveraĵojn kun minimumigo de fabrikada tempo.
6. Ni estas plene dediĉitaj al niaj klientoj. Se ne eblos plenumi viajn postulojn post ekzamenado de ĉiuj elektoj, ni ne trompos vin farante falsajn promesojn, kiuj kreos bonajn klientajn rilatojn.
Fabrikejo
KONTAKTU NIN
Kontaktulo:Sinjorino Jessica Wu
Retpoŝto :sales@heatshrinkmarket.com
WhatsApp/Wechat : 0086 -15850032094
ADRESO:No.88 Huayuan Road, Aoxing Industria Parko, Mudu Town, Wuzhong Distrikto, Suzhou, Ĉinio
